
* Version 1.0.44:
 - The Perl and Python wrappers are gone. The daemon can now use a
configuration file without requiring external dependencies.
 - Pure-FTPd can now be linked against OpenSSL 1.1.x
 - The QUIT command didn't work properly when the server was compiled
without support for RFC2640. This has been fixed.
 - 3DES was removed from the default cipher suite.

* Version 1.0.43:
 - Passwords can now be hashed using Argon2i, which is now the default
algorithm for puredb accounts.
 - Authentication against system accounts is compatible with OpenBSD
6.0.
 - The -J switch didn't work properly in version 1.0.42. This has been
fixed.

* Version 1.0.42:
 - Compilation fix for OpenBSD and Bitrig when Pure-FTPd is not
compiled with libsodium.
 - The connection is now dropped if HTTP commands are received.
 - LDAP force_default_gid and force_default_uid now work as documented.
 - The ONLY_ACCEPT_REUSED_SSL_SESSIONS switch (introduced in Pure-FTPd
1.0.22 circa 2009, but disabled back then due to client compatibility
concerns) is now on by default, except in broken clients compatibility mode.

* Version 1.0.41:
 - MariaDB and MySQL 5.5+ are now fully supported
 - MySQL <= 4.0.0 is not supported any more
 - Some Linux distributions ship a version of OpenSSH without support
for ECC. Pure-FTPd can now be compiled on these.
 - New command-line switch: -2/--certfile= to set the path to the
certificate file when using TLS.

* Version 1.0.40:
 - Support for TCP_FASTOPEN added on Linux
 - The LDAP configuration file didn't allow a default gid without also
defining a default uid. This is no longer the case.
 - The process handling a user session could be crashed by trying to
match a file pattern longer than the maximum length for a path. This
has been fixed. Upgrading is recommended.

* Version 1.0.39:
 - Compilation fix for ancient versions of OpenSSL.
 - TLS sockets shutdown fixed in order to prevent incomplete transfers.

* Version 1.0.38:
 - Passwords hashed using scrypt can be used in the MySQL, PostgreSQL
and LDAP backends.
 - Support for TLS forward secrecy was added. If you are upgrading and
using TLS, please run the following command prior to launching the new
version:
# openssl dhparam -out /etc/ssl/private/pure-ftpd-dhparams.pem 2048

* Version 1.0.37:
 - The -C: prefix can be added to the cipher suite in order to make valid
client certificates mandatory. This is no longer a compile-time option.
 - The Clear Command Channel (CCC) command is now supported.
 - SSL (v2, v3) is refused by default.
 - The PureDB backend supports the scrypt function in order to hash
passwords. This is the preferred algorithm, but requires the presence
of libsodium.
 - LDAP uid and gid values can over overridden in the LDAP configuration file.

* Version 1.0.36:
 - Support for external authentification handlers has been fixed.
Reported by Rasmus Fauske.
 - Directory listings can now report file sizes up to 1 exabyte.
 - Pure-FTPd is now useable on Win32 again.
 - Per popular request, dot files are now hidden from directory listings when
the -X flag is turned on.

* Version 1.0.35:
 - An old-standing bug has been fixed: when a file was renamed and
overwrote an existing file, the quota wasn't properly updated.
Reported by Hiramoto Kouji.

* Version 1.0.34:
 - Fix uploads. The bug was introduced in version 1.0.33. Thanks to
Hugo Gomes.

* Version 1.0.33:
 - SITE UTIME now supports the 2-arguments syntax in addition to the
5-arguments syntax.
 - Support for the MFMT command has been implemented.
 - A default directory can now be specified when using the LDAP backend.

* Version 1.0.32:
 - Support SHA1 password hashing in MySQL and PostgreSQL backends
 - Support for braces expansion in directory listings has been
disabled - Cf. CVE-2011-0418

* Version 1.0.31:
 - The list of allowed ciphers for SSL/TLS connections can now be
specified (--tlsciphersuite / -J).
 - Shell-like escaping is now partially handled when emulating the
"ls" command in order to improve compatibility with legacy clients.
 - Linking issues with MySQL support on Fedora have been solved.

* Version 1.0.30:
 - pure-quotacheck can now work with a large number of files.
 - OPTS UTF-8 is now an alias to OPTS UTF8.
 - Fix a STARTTLS flaw similar to Postfix's CVE-2011-0411.

* Version 1.0.29:
 - Fixed corruption when downloading > 4 Gb files on a 32-bits arch.
 - Fixed error on exit on Linux.
 - Downloading should be slightly faster.

* Version 1.0.28:
 - When --autorename is enabled, an upload script will now get the final
file name instead of the original one.
 - The ALLO command now checks for the actual disk space in addition to the
virtual quota.
 - ABOR on OSX has been fixed.
 - Fixed the virtual quota computation after an atomic upload has been
resumed.
 - Fixed AUTH_ENCRYPTED.
 - A workaround against spurious disconnections with ncftp has been
implemented.

* Version 1.0.27:
 - IPv6 connections are accepted again (regression from version 1.0.26)
 - SSLv3 renegociation has been disabled
 - .pureftpd-upload-* files can be deleted by users with no quota.
 - The server can be forced to shut down on iPhone.

* Version 1.0.26:
 - Fix incompatibilities with Cyberduck and dramatically speed up directory
listings and transfers when TLS is enabled with some other clients like LFTP.
 - Allow authentication of non-chrooted users again. It was a regression
from version 1.0.25. Spotted by Juergen Daubert.

* Version 1.0.25:
 - The FTP server can now be built as a library for iPhone and iPod Touch.
 - Display symbolic links in the MSLD command as symbolic links, unless the
broken clients mode is enabled, just like STAT/LIST/NLST.
 - Enhanced compatibility with gcc 2.x and with custom installation paths.
 - Fix packaging issues, especially when the server isn't installed in the
default paths
 - Downloads now require less CPU and less memory.
 - Fix an infinite loop that could lead to a client process burning a CPU
core if the client didn't disconnect properly. Reported by Thomas Min and
Margus Kaidja.
 - Handle fake download resumes the traditional way for the sake of being
compatible with weird clients that insist on doing that.
 - The group name is now always displayed instead of the gid when it matches the
primary user group.

* Version 1.0.24:
 - When using LDAP in BIND mode, empty passwords are refused. Reported by
Henning Brauer.

* Version 1.0.23:
 - The LDAP schema has been fixed.
 - LDAP authentication through binding is now possible in addition to
passwords. This allows for the FTP server to run with an unprivileged LDAP
account.
 - In LDAP objects, the "enabled" value is accepted again as a FTPStatus
property.
 - Privilege separation is now enabled by default.
 - The server should now properly compile on Solaris with privsep.
 - Charset conversions are properly made on directory names.
 - Transfers now handle every kind of disconnection.
 - More informative log messages for errors and activity reporting.
 - Virtual quotas are way more reliable and uploads are interrupted as soon as
quotas are exceeded.
 - Atomic uploads are only used when necessary and only if --notruncate is
enabled.
 - Dangling .pureftpd-upload files should be a thing of past.
 - Enhanced conformance with RFCs and better compatibility with FTP clients.
 - Improved SSL performance, compatibility and commands support.
 - By default, up to 10000 files per directory can be listed instead of 2000. 
 - ALLO can now tell clients whether an upload would blow quotas before the
upload actually starts.
 - PAM is now enabled by default on OSX.
 - Switch euid to the _pure-ftpd account (unless it's nonexistent) in the
privsep process.
 - --without-banner is not necessary any more. Having a cookie file
(--fortunefile=...) automatically disables the default banner, thus allowing
full customization of the welcome banner.
 - ./configure --localstatedir is now honored in order to change the
run-time directory.
 - Support for building a FTPS (implicit SSL/TLS) server, using
--with-implicittls

* Version 1.0.22:
 - the LDAP authentication backend now supports TLS encryption.
 - TLS encryption is supported on data channels.
 - downloads require way less CPU time on platforms with slow mmap() calls.
 - MySQL 5+ stored procedures can now be used in the authentication process. 
 - time zones issues should be fixed for good.
 - on-demand directories can now be created with any set of permissions.
 - password scrambling of MySQL 5+ is now supported.
 - a catalan translation has been contributed.
 - spurious disconnections due to some clients keepalive tricks have
been fixed.
 - custom authentication handlers are now informed about the encryption
status of the session.
 - standard-conformance and compatibility with several clients have improved.
 - large files are now supported by default.
 - enhanced support for Solaris.
 - a bunch of bug fixes, optimizations and compatibility with newer
libraries and operating system versions.
 - "ftp" and "anonymous" user names can have passwords if the -E switch (no
anonymous logins) is specified.
 - in compatibility mode, non-dangling symbolic links are now displayed as
if they were regular files/directories.
 - --with-everything now includes privsep.
 
* Version 1.0.21:
 - pure-pw has a new option (-F) to specify the location of the puredb
database.
 - --with-rendezvous is now --with-bonjour.
 - User names can now be up to 127 characters long by default.
 - Compilation with PAM support has been fixed on MacOS X.
 - The MySQL PASSWORD() function can now be used with MySQL >= 4.1.
 - Logging has now the correct timezone.
 - Experimental support for RFC2640 (UTF-8), based upon code contributed by
Jui-Nan Lin.
 - The LDAP schema has been changed: FTPStatus should be a boolean.
 - The pid file can now be set for pure-authd and pure-uploadscript.
Contributed by Old Sparky.
 - Support for large files is now enabled by default, with no slowdown on
Linux.
 - SITE UTIME and OPTS MLST have been implemented.
 - Huge performance improvement while transfering a lot of small files.
 - Better handling of aborted transfers.
 - MySQL queries can now include multiple statements (MysQL 4.1 and later)
and call MySQL 5 stored procedures. Thanks to Mike Goins.
 - MySQL connection errors are now logged.

* Version 1.0.20:
 - On MacOS X Panther and Tiger, clients were sometimes rejected when they has
no reverse DNS entry and DNS resolution was enabled. This has been fixed.
Thanks to Yann Thomas Gerard <inside@parasiterecords.com> .
 - The command-line parser was broken on FreeBSD and Solaris in version
1.0.19. This has also been fixed.
   People running other operating systems don't need to upgrade.

* Version 1.0.19:
 - A workaround for pure-ftpwho not working on OpenBSD has been added.
 - Real disk space is no more shown.
 - A possible denial of service when too many users were connected should be
fixed. Reported by Agri <agri@desnol.ru>, thanks!

* Version 1.0.18:
 - A new, nice-looking PDF version of the documentation is now available from
http://www.pureftpd.org/readme.pdf . Contributed by Torgny Wernersson.
 - The beast now compiles and links against MySQL 4.1.x, but passwords must
not be hashed with MySQL-specific hashing function.
 - Buglets were fixed in the documentation.
 - Two new translations were added : hungarian and catalan. Contributed by
Bánhalmi Csaba and Contributed by Oriol Magrané.
 - The server now uses distinct IPv4 and IPv6 to listen to both protocols on
all operating systems. A new switch, -6, forces the server to only listen to
IPv6.
 - W3C and CLF alternative log formats are now more standard conformant.
 - Pure-FTPd can now produce WU-FTPd (xferlog) compatible log files.
 - Support for Rendezvous was added on MacOS X.
 - Support for Apple / GNUStep plist data output was added to pure-ftpwho.
 - UTF-8 characters are now supported in file names. A new switch,
--without-unicode, can be used to filter out non-latin characters.

* Version 1.0.17a:
 - An old standing issue has been fixed : ungracefully aborted transfers
caused the session to exit without removing ftpwho entry and atomic files.
This fix also speeds up ftpwho and peruserlimit.

* Version 1.0.17:
 - The SSL certificate file can now be changed through a new configuration
switch, --with-certfile. It doesn't depend on sysconfdir any more and it
defaults to the original location : /etc/ssl/private/pure-ftpd.pem .
 - Shadowed NIS accounts and MacOS X Panther system accounts are now processed
by the pure-pwconvert tool.
 - The server doesn't reject users any more on Linux when capabilities are
used.
 - The documentation has been improved (man pages, README, FAQ, typos).
 - Optimizations have been made.
 - SO_REUSEPORT is now used on FreeBSD to always bind the ftp-data port.
 - SSL-related error messages are now more explicit.
 - The SITE TIME command has been implemented.
 - The sample PAM configuration file has been rewritten.
 - A logfile parser has been added to the contribs.
 - MacOS X Panther specific instructions have been added.
 - Upload is now atomic. A file is uploaded with a temporary name and it gets
its final name only once the upload has been completed. If a file already
exists with the same name, the content can be preserved until the new content
has been fully transfered (using the new --notruncate run-time switch). Web
servers will no more serve partially transfered files during uploads.
  The new handling of uploads also limits the races in virtual quota handling.

* Version 1.0.16c:
 - The PAM backend and the CGI mode were accidentally broken in version
1.0.16b. This version fixes both issues.
 - The Norwegian translation has been updated.

* Version 1.0.16b:
 - The server now properly compiles with SSL/TLS on RedHat 9 systems.
 - pure-ftpwho now outputs nice-looking XHTML 1.1 conformant code, an XSS
issue has been fixed and the local host name is now properly displayed in
verbose mode.
 - The path to SSL certificates now follows the --sysconfdir prefix.
 - Minor optimizations have been made.
 - IPv4 and IPv6 addresses will now listen for connections even
without the -4 switch on NetBSD and FreeBSD.

* Version 1.0.16a:
 - pure-uploadscript was broken in 1.0.16 due to a typo and sometimes it
wouldn't work on some systems.

* Version 1.0.16:
 - Authentication is now working on Solaris with shadow/NIS. Based
upon a patch by Axel Apitz <a_apitz@pixelpark.com>.
 - Bugs in starting scripts were fixed.
 - A big cleanup in man pages was performed by Claudiu Costin.
 - Support for SSL/TLS was implemented. This is the end of cleartext
passwords sent through the network.
 - Pure-FTPd is now working on MacOS X Panther.
 - The software can also be linked against MySQL 4.1.x.

* Version 1.0.15:
 - A turkish translation has been added. Thanks to Mehmet Cokcevik
<dns@netline.com.tr> .
 - Various functional and portability fixes have been made to the
handling of upload scripts, to the pure-pw command and to the
automatic creation of home directories.
 - Accounts in a puredb database can now be quickly listed ("pure-pw
list").
 - The anonymous FTP directory can now be overriden on the Windows
port (using a WIN32_ANON_DIR environment variable).
 - The default banner has been stripped down to look more
professionnal (ie. boring).
 - Transfer speed on BSD systems has been improved.
 - The license of the whole package has changed from GPL to a simplified
BSD license.

* Version 1.0.14:
 - Privilege separation has been introduced. When this feature is
enabled, each client session spawns two processes communicating over a
private channel : a restricted trusted part and the main part that
definitely revokes all privileges after authentication and chroot().
Add --with-privsep to ./configure in order to enable that feature.
 - Automatic detection of Virtuozzo was added.
 - Forced passive IP addresses (-P) can now work with gateways whose
addresses are dynamic (DSL and cable modem users), using symbolic host
names.

* Version 1.0.13a:
 - The previous release broken compilation with PostgreSQL and it
didn't work any more with very old versions of the Perl interpreter.
Both issues were fixed. No other change has been made - If 1.0.13
works for you, there's absolutely no need to upgrade.

* Version 1.0.13:
 - Traditional and simplified chinese translations are not messed any
more (Thanks to Ying-Chieh Liao) .
 - The documentation has been improved.
 - OpenLDAP 2.1.x is now supported.
 - New LDAP directives were added to provide more flexibility
(LDAPFilter, LDAPHomeDir and LDAPVersion, see README.LDAP) .
 - On-demand directories are now also created when path contains extra
slashes.
 - pure-uploadscript will no more immediately give up when the server
hasn't been started before.
 - Files whose names contains non-printable characters are not listed
any more.
 - A new switch (--with-boring) has been introduced to produce more
professional-looking messages.
 - Zero-copy transfers of large files have been fixed on Solaris,
thanks to Emmanuel Hocdet.
 - Larger banner messages can now be displayed.
 - Owner-readability is now only enforced for files when quotas are
enabled (Claudiu) .
 - A new Czech translation has been added. Contributed by Martin Sarfy
<xsarfy@informatics.muni.cz>
 - Default UID and GID can now be used for SQL-based authentication,
contributed by Clive Goodhead, adapted to PostgreSQL as well.
 - A Vpopmail authentication module has been added
(contrib/pure-vpopauth.pl) .
 - "make -f Makefile.gui" should work again on most today's Linux
distributions.
 - The Win32 port was slightly improved. The server is now compiled as
non-root (but binds port 21) and ASCII transfers are not mangled any
more.
 - The RPM initialization script (redhat.init, installed as
/etc/init.d/pure-ftpd) now calls pure-config.pl . It means that
/etc/sysconfig/pure-ftpd is deprecated and you must use
/etc/pure-ftpd.conf instead.

* Version 1.0.12:
 - New workarounds and conformance fixes were added to improve client
compatibility.
 - Zero-copy downloads are now enabled on HPUX and Solaris.
 - Russian and Chinese (simplified + traditional) translations were
added.
 - LDAP_FTPUID and LDAP_FTPGID are now really fetched from the
directory.
 - The Windows ports has been stabilized.
 - A protection against common bruteforce scanners for hidden directories
has been added.
 - The FTP data connection assurance draft (ESTA/ESTP) has been implemented.
 - Per-user (including anonymous) concurrency limits are now available.

* Version 1.0.11:
 - New translation: norwegian. Contributed by Kurt Inge Smċdal /
EasyISP.org <kurt@easyisp.org> .
 - The server now compiles and runs on OpenBSD/Sparc and HPUX.
 - Minor fixes and cleanups were made.
 - The good'ol poweredby.jpg logo has been replaced by pure-ftpd.png, the
new official logo contributed by Gabriele Vinci <gabriele@pronto.it> .
 
* Version 1.0.10:
 - Pure-FTPd can now compiles out of the box on OpenBSD with PostgreSQL.
 - Overall minor speedups were comitted.
 - File names with multiple successive dots in their names are now accepted
in a virtual chroot jail.
 - A "customerproof" option has been added, in order to turn on workarounds
against common customer mistakes (-Z / --customerproof) .
 - Spec file has been improved.
 - PureDB has been upgraded to version 2.1 .

* Version 1.0.9:
 - The server can now run 100% as a non-root user with all features turned on,
including chroot, virtual domains and virtual users.
 - ACLs for virtual users (puredb) can now resolve dynamic host names, not
only static IP addresses.
 - The LDAP backend now supports an extended schema with quota, ratios,
bandwidth management and FTP-specific uid/gid attributes.
 - MD5 hashed passwords are now implemented in the PostgreSQL backend.
 - External authentication modules are now properly working on non-Linux
systems and they can compile without ratio/quotas/throttling.
 - Korean, Spanish and Slovak translations were updated.
 - System random devices can now be probed at run-time.
 - PAM examples are now more generic.

* Version 1.0.8:
 - /./ in path to home directory is now accepted for anonymous users.
 - Virtual chroot can now play nicely with the non-root mode: users are
restricted to the directory pure-ftpd was started in.
 - The package was ported to AtheOS and Windows.
 - pure-quotacheck can now run as any user. (suggested by Philip Mak
<pmak@aaanime.net>) .
 - MD5 passwords can now be used in SQL authentication. -Contributed by Nicolas
Doye.
 - W3C logfiles can now be generated (-O w3c:/path/to/log/file) . -
contributed by Thomas Briggs <tom@sane.com> .
 - New switch: -G (--norename) to disallow rename.
 - Pure-FTPd works again on MacOS X.
 - An external authentication handler (-lextauth:/path/to/socket) was added,
so that any custom authentication scheme can easily be added without
recompiling anything. See the README.Authentication-Modules file for more
info.
 - Long-standing bugs were fixed, compatibility with SecureFX was improved,
compilation with SSL-enabled OpenLDAP is now properly working, bashisms were
removed, source code was cleaned up, FAQ has grown, etc.

* Version 1.0.7:
 - Use OpenBSD security features when applicable. Thanks to Brad Smith
<brad@openbsd.org>
 - Virtual hosts and virtual chroot can now play together.
 - Directory aliases ("cd" shortcuts and "SITE ALIAS" command) were
implemented. (by Kenneth Stailey <kstailey@yahoo.com) .
 - Bug fixes in virtual chroot and -k .

* Version 1.0.6:
 - New "virtual chroot" feature: chrooted users can now follow any symbolic
link, even when it is pointing to a file located outside the user home's
directory. You must configure with --with-virtualchroot to enable that
feature.
 - Users can now be stored in a PostgreSQL database. Contributed by Cindy
Marasco <cindy@getaclue.org> .
 - More compilation fixes for old Solaris versions.
 - A workaround for an FTP Explorer bug has been fixed. -Thanks to Shiroiwa
Noboru for reporting this.
 - pure-pw useradd now works on some buggy GlibC versions.
 - New translation: Swedish. Contributed by Ulrik Sartipy <ulrik@raj-raj.net>
 - Access to dot-files is now allowed even with virtual quotas. Thanks to
Benoit Massard.

* Version 1.0.5:
 - Rename and delete operations are now syslogged.
 - Multiple IP/mask filtering rules can now be used for a single account with
virtual users (puredb) .
 - Pure-FTPd now compiles and runs on systems without snprintf(), especially
Solaris < 2.6 . (contributed by Kenneth Stailey) .
 - Documentation and translations were updated.
 - Minor bugs were fixed.

* Version 1.0.4:
 - .message files are now handled on Irix systems - Michael Glad
<glad@daimi.au.dk> .
 - Passive mode can now be handled through SMC Barricade routers, that
deliberately block it. Contributed by Gareth Blades <info2@gbnetwork.co.uk>
 - A preliminary FAQ was added.
 - The package now compiles and runs on Corel Netwinder devices (Gareth
Woolridge) .

* Version 1.0.3:
 - A workaround for a bug in Macromedia Homesite was added. Thanks to
Stephan Wentz <wentz@gmx.de> for his help on that issue.
 - ASCII downloads have been optimized.

* Version 1.0.2:
 - Non-atomic renaming of files is now supported when virtual quotas are
enabled.
 - New compile-time option to support system (not virtual) quotas.
 - pure-ftpwho displays bandwidth usage and download progression again.
Thanks to Erik Larsson for reporting this.
 - On-demand creation of home directories can now create all parent
directories.
 - New UPLOAD_VUSER environment variable, to fetch virtual user names
through pure-uploadscript.
 - PureDB version 2.0 was merged in. Lookups are 2x to 10x faster than with
version 1.0, due to a new binary search code, contributed by Philip Gladstone
<philip@okena.com>
 - New MaxDiskUsage configuration file in Perl/Python config file parsers.
Contributed by Laurent Culioli <laurent@mandrakesoft.com>


                            ***** IMPORTANT *****

If you are using PureDB files with versions < 1.0.2, you must rebuild the
database (pure-pw mkdb) after upgrading to 1.0.2 or later.

                            ***** IMPORTANT *****

* Version 1.0.1:
 - Bandwidth throttling is now fixed on Linux platforms when sendfile() is
enabled.
 - Quotas fixes.
 - ASCII upload fixes. Thanks a million to Terry Davis <td@birddog.com> for
his help.
 - New funny french messages pack.

* Version 1.0.0:
 - Support Base64-encoded MD5/SHA and salted MD5 (SMD5) and SHA (SSHA) 
LDAP passwords.
 - Fixed throttling with virtual users.
 - Members of the trusted group can delete files even when -K is enabled.
 - New translations: Slovak (contributed by Robert Varga) and Korean
(contributed by Im Eunjea) .
 - Portability enhancements. Pure-FTPd now compiles and runs on SGI Irix.
Thanks to Florin Andrei.
 - Fixed compilation on Sparc 64-bit architectures with Sun Forte C
compiler. Contributed by Xavier Beaudouin <kiwi@oav.net>
 - Code cleanups. -Matthias.
 - pure-pw can build puredb databases, regardless of server compilation
options. Suggested by Arkadiusz.
 - New --with-confdir switch for ./configure .
 - Allow files beginning/ending with spaces. Thanks to Andreas Piening
<Andreas.Piening@ePost.de> for helping to solve that issue.

* Version 0.99.9:
 - All known bugs in pure-ftpwho were fixed.
 - Robustness improvements.
 - Directory listings speedups.
 - New '-m' option to pure-pw that automatically calls pure-pw mkdb after
a change to an account. Suggested by Olivier Deckmyn.
 - New optional PURE_PASSWDFILE and PURE_DBFILE environment variables for
pure-pw. Suggested by Olivier Deckmyn.
 - "pure-pw mkdb" without any further argument can now rebuild the database
with default files.
 - New Italian translation, contributed by Stefano F. <fs@sp.unipi.it> .
 - New Brazilian Portuguese translation, contributed by Roger Constantin
Demetrescu <roger.demetrescu@gmail.com>
 - New poweredby.jpg web button, contributed by Freeman <freeman@ozac.org>
 - New -g (--pidfile=) option to specify the location of the PID file.
Suggested by Jason Lunz.

* Version 0.99.4:
 - Better support for LFS. Contributed by Thorsten Kukuk <kukuk@suse.de> .
 - Pure-PW bug fixes.

* Version 0.99.3:
 - Old versions of MySQL (<= 3.22.x) are now supported. Thanks to Marc
Jauvin <marc@register4less.com> .
 - Individual quotas can be stored in MySQL databases. Contributed by Marc
Jauvin.
 - Support for MySQL's password() hash function. Contributed by Robin
Ericsson (lobbin) .
 - New "any" option for the MySQLCrypt field, to match any hashing function.
 - Use MySQL transactions with InnoDB, BerkeleyDB and Gemini tables.
 - Ratios and bandwidth can now be stored in MySQL databases.
 - New SQL digraph: \D (remote IP address as a long decimal number).
Suggested by Bernie.
 - Individual IP filtering and time restrictions can be enabled for virtual
users.
 - New uploads are now removed if the quota has already been exceeded.
 - Pure-FTPd now compiles and works on very old Linux distributions and
Darwin (MacOS X) .

* Version 0.99.2a:
 - When quotas were enabled, but no quota was specified, uploads were
always truncated to 0 bytes. It has been fixed.

* Version 0.99.2
 - Dutch translation, provided by Johan Huisman
<sietze.jan.huisman@12move.nl> and Jan van Veen <jveen@triple-p.nl>
 - Fix --createhome option, reported by Lan Yufeng.
 - New --without-iplogging compile-time switch to never log any IP address,
for servers that need to protect privacy. Suggested by Jeff Moe.
 - Added a workaround for buggy IP stacks.
 - RPM can now be build with PAM support.
 - A new safe-guard protects users against executing confusing chmod commands
on their home directories (and root on /, too) .
 - Support for virtual quotas (new option: --quotas / -n , new command:
pure-quotacheck) . Please read the "virtual quotas" section in README.
 - New port: Playstation 2 Linux, thanks to Tomonori Kamitaki
<tomo@t-square.jp>
 - The memory footprint for uploads has been slightly reduced, especially
when bandwidth throttling is enabled. Thanks to Daniel Tschan.
 - Virtual users (FTP-only local user list, independant of /etc/passwd) were
implemented. Every user can have different bandwidth, quota and ratio.

* Version 0.99.1b
 - Access to remote MySQL databases has been fixed.
 - New program: "pure-statsdecode" to convert timestamps into human-
readable dates in "stats" logfiles.
 - IP addresses of remote clients can now be used in SQL queries with a new
'\R' digraph.
 - A default uid and gid can now be specified for LDAP objects.
 - The shell is not checked any more with MySQL and LDAP authentication
schemes.
 - New switch: --createhomedir (-j) to automatically create missing home
directories. Suggested by Christian Janssen <c.janssen@de.kddi.com> .

* Version 0.99.1a
 - New alternative logging format: "stats", designed for the ftpStats
application.
 - Cosmetic fix with ratios.
 - New -K / --keepallfiles directive.
 - Workaround for broken clients that don't properly end up their command
lines.

* Version 0.99.1
 - Accounts can now be stored in a MySQL database.
 - Uploadscript work together with Apache-like log files.
 - Support for asynchronous (pipelined) FTP.
 - Process names are now properly changed on Linux.
 - Always report download progression and individual bandwidth usage in
pure-ftpwho.
 - Fix support of old Solaris versions.
 - Bandwidth throttling is now working with > 2Gb files.
 - Assorted optimizations, bug fixes and cleanups.

* Version 0.99b
 - Big fixes and improvements to LDAP authentication: Solaris compilation
fixes and support MD5 and SHA1 digests.
 - Fixed Apache-like log files for Webalizer.
 - Downloaded/uploaded files are now logged with LOG_NOTICE priority.
 - Support for network filesystems.
 - Display real user name instead of uid even for chrooted users.
 - Don't crash after authentication failures when the server is launched in
non-root mode.
 - RPM improvements.

* Version 0.99a
 - Always display the local IP and port with pure-ftpwho -v.
 - Fixed CLF logfiles. Thanks to Paul Hansen for reporting this.

* Version 0.99
 - New README.Debian file.
 - Danish translation, contributed by Isak Lyberth.
 - Fixed throttling and performance improvements on FreeBSD. Reported by
Rafa Michaelski.
 - Show setuid/setgid/sticky bits in ls -l.
 - New -R/--nochmod option to disallow SITE CHMOD usage.

* Version 0.99pre2
 - "ftp" can be used as a fake shell, no need to add it to /etc/shells.
 - Improvements to the RPM package.
 - More accurate throttling.
 - New "-1" (--logpid) option to add PID info to syslog output. Contributed
by Matthias Andree.
 - Changed the trusted gid behavior when the /./ trick is used: members of
the trusted group *are* chrooted, but they have no ratio and dot-files are
allowed - Suggested by Leszek Reimus.
 - New --with-paranoidmsg compile-time option to favor paranoia over
sysadmin-friendly messages.
 - New --with-everything compile-time option to build a full-featured server.
 - Backward compatibility with old IP stacks (old GlibC, Solaris < 8, ...)
 - --help now displays the server version (only for root) .
 - Memory optimizations.
 - New --altlog option to created log files in alternative formats.
Apache-like files can be produced so that any web statistic software can be
used to analyze Pure-FTPd activity.
 - Workaround for an AbsoluteFTP bug (reported by Daniel Elsaesser)
regarding CWD error codes.

* Version 0.99pre1
 - Have MSIE open an authentication dialog when anonymous users are
forbidden (-E) in compatibility mode (-b) .
 - Don't choke CuteFTP when the NAT mode (-N) is enabled. Reported by David
Vincelli.
 - Have metacharacters work on OpenBSD.
 - Fixed typos in documentation.

* Version 0.98.7
 - Fixed a bug with ASCII upload: with some clients, the last carriage
return wasn't written.
 - Allow the retrieval of regular files pointed by symbolic links.
 - Fixed arithmetic errors in pure-ftpwho.
 - CHMOD and DELE workarounds for broken clients.
 - Optimizations.
 - Don't hangup when a new transfer is asked but no semaphores are available.
 - Try to handle very low bandwidth throttling (reported by Sergey Mihailov
<nxg@nod4mail.pvrr.ru>) .

* Version 0.98.6
 - Fixed a nasty bug introduced in 0.98.5: overwriting a file didn't
truncate the previous content (Reported by Chris Mentjox).

* Version 0.98.5
 - Recognize ADAT command to please Kerberized Fetch 5 clients (Macintosh) -
Thanks to Darren Casey for reporting this.
 - Fix syslog output on broken implementations without locking (reported by
Sami Koskinen).
 - Don't auto-login to please some broken clients who are sending strange
commands before being authenticated.
 - New 'contrib' directory with users-contributed work.
 - Fix support for > 2Gb files on Linux.
 - Fix PAM support on Solaris.
 - Don't wait after a download when throttling is enabled.
 - Implement --maxdiskusagepct and --maxload options on non-Linux systems.
 - Accept non-anonymous users in virtual hosts (suggested by Chris Mentjox
<chris@widexs.nl>.
 - Parse all clients in pure-ftpwho, even when we reached the limit
(reported by Brandon Covert).
 - Performance improvements under high load: rewritten command parser.
 - Don't remove partially uploaded files for non-anonymous users.
 - The script run after an upload can now get extra info about the newly
uploaded file in environment variables: UPLOAD_SIZE, UPLOAD_PERMS,
UPLOAD_UID, UPLOAD_GID, UPLOAD_USER and UPLOAD_GROUP.
 - New option (-r) to automatically rename uploaded files instead of
overwriting them.
 - New option (-i) to disallow upload to anonymous users, whatever directory
permissions are (suggested by Chris Mentjox).
 - New option (-V <ip>) to restrict non-anonymous access to a specific IP
address.
 - New configuration flag: --with-virtualhosts to enable /etc/pure-ftpd/
support.

* Version 0.98.4
 - The nasty bug of the -C option was finally fixed: no more syslog output
in client sockets (Thanks to Paul Hansen for tracking this down).

* Version 0.98.3
 - Reliability fixes.
 - Security fix for non-Linux and non-BSD systems.
 - Fix listing of symbolic links to directories (Reported by Martin
Hadenfalk) .

* Version 0.98.2a
 - Accept "." in LDAP user names.
 - Fix --sysloghack typo for Debian users.

* Version 0.98.2
 - Enhanced portability: the server is now working on LinuxPPC, Solaris 8, 
Tru64 and possibly other modern operating systems. Thanks a lot to Erik
(Cirvam, <erik@sublevo.com>) for his very nice help on the Solaris port.
 - Backward-compatibility with old OpenLDAP releases (1.x), thanks to
M.Robbins.
 - Bandwidth is properly reported after a resumed transfer.
 - Transfers can now be gracefully aborted by clients. 
 - Improved performance: lower system load during transfers (especially
under Linux and FreeBSD) and various optimizations.
 - Improved performance (2): new code for directory listings, way much
efficient than the previous one, with reduced memory footprint and disk I/O.

* Version 0.98.1
 - Files and directories can now have separated umask. It fixes the 'mkdir'
permissions problem introduced in 0.98.
 - Improved display of user group list.

* Version 0.98
 - Support for long options on BSD.
 - Actually include the polish translation.
 - Spanish translation (Luis Llorente Campo). 
 - Renamed mrtginfo to pure-mrtginfo.
 - The default umask is now 133. By explicitely setting the mask to 022,
uploaded files can become executable.
 - Logging can be disabled (-f none) .
 - Upload and download bandwidth can now be throttled separately.
 - Pure-ftpwho is now reporting transfer progress, file sizes and individual
bandwidth usage. There's also a new target (-s, 'shell mode') for easy
parsing with cut/sed .
 - A new daemon (pure-uploadscript) can now automatically run a program or
script after a successful upload.

* Version 0.97.7
 - Fixed Xinetd documentation (Olivier Tharan).
 - Added 'welcome.msg' compatibility (Togusa).
 - Change process names on BSD systems.
 - Minor bug fixes or optimizations.
 - Completed the romanian translation (Claudiu) .
 - Added polish translation (Arkadiusz) . 
 - Safe defaults for -c.
 - New 'pure-ftpwho' command to display current active connections, with
text, HTML, CGI and XML outputs.

* Version 0.97.6
 - Allow anonymous users to read dot-files if '-z' is specified.
 - New option: '-N' for servers behind broken NAT/masquerading gateways.
 - Fixed a possible security flaw in file listings.
 - Display '.banner' files for all users, not just anonymous ones (suggested
by Shea Martin) .
 - Fixed -U option (reported by Shea Martin) .
 - Updated documentation/man pages.
 - Happy Easter to everyone:)

* Version 0.97.5
 - Optimizations and portability improvements.
 - Bug fixes: a wrong file size was logged for uploads, no space after the
result of SIZE (fixes a problem with LeechFTP), keep all connections even
under high load and improved configuration file parsers.
 - New option: '-4', to only accept IPv4 connections (needed for OpenBSD).

* Version 0.97.4
 - Fixed a nasty bug with group initialization introduced in 0.97.3 .
Reported by Brian <silent@heracles.cuties.org> .

* Version 0.97.3
 - Pure-FTPd now works on Linux and FreeBSD.
 - German, romanian and french translations.
 - Size of downloaded files is always logged.
 - Enhanced support of the FTP protocol and modern extensions: multi-lines
responses for HELP/FEAT, STAT command and new format for directory listings
through MLST and MLSD (autodetected by NcFTP) .
 - Minor cosmetic changes and more compilation flexibility.
 - The server can now run as a non-privileged user.
 - New '-k' flag to disallow upload if mode than X % of the partition is full.
 - /var/run/pure-ftpd.pid is created in standalone mode.
 - Support for alternative long GNU options, with built-in help.
 - Minor bugfixes.

* Version 0.97.2
 - Fixed a big bad typo in 0.97.1 that prevented passive transfers from
working.
 - EPSV ALL support.
 - The standalone server daemonizes if '-B' is given. Contributed by Jason
Lunz.
 - Added the size of downloaded/uploaded files in log messages.
 - Minor optimizations.

* Version 0.97.1
 - More security paranoia for passive connections handling.
 - Fixed a bug with .message and .banner files containing nothing but white
spaces (thanks to Emmanuel Hocdet <man@t-online.fr> for reporting this) .
 - More compatibility in (-b)roken mode: disable HELP and ask a dummy
password to anonymous clients.

* Version 0.97-final
 - Accept non-ascii (accents) file names. (Reported by Louis Rouxel
<louis@splio.com>)
 - Dynamic process title change.
 - Stabilized the standalone code.
 - New '-E' option to disallow anon login even if ~ftp exists (Suggested by
Daniel Elsaesser) .
 - New '-C' option to limit the number of simultanous connections from the
same client IP address.

* Version 0.97pre5
 - Pure-FTPd has now a fast and IPv6 capable standalone mode,
so that a super-server is no more required.
 - New '-U' option to change the umask.
 - New '-x' and '-X' option to prevent users from reading/writing
dot-files, even if they own them to protect files like .ssh, .qmail,
and .history .(Thanks to William Kern for the suggestion) .
 - Bandwidth throttling is now specified in exact KB/s.

* Version 0.97pre4
 - Added '-D' option to force 'ls' display dot-files even when a
client doesn't send the '-a' option (ls -la) .
 - Keep the previous permissions when overwriting a file.
 - New '-I' option to change the maximum idle time.

* Version 0.97pre3 / 0.96.2
 - Fixed HELP and SITE commands.
 - Faster globbing and more eye-candy built-in "ls" format.
 - Support for shadow passwords expiration dates.
 - Support for large files (> 2 gigabytes) .
 - FXP now works with IPv6 as well.
 - Standard 'fortune' files are now used as login cookies.
 - Easier to parse and more verbose log messages.

* Version 0.97pre2
 - Memory allocation bug fixed in glibc-glob.
 - Macroized ls.c messages for translation. 

* Version 0.97pre1
 - Check for and convert 4-in-6 addresses.
 - Count IPv6 connections.
 - Code cleanups, optimizations and more paranoia.
 - Ready for translated messages.
 - LDAP support fixed.
 - Configurable fortune cookies (new '-F <file>' option).

* Version 0.96.1
 - Definitive fix against possible globbing denial of service.
 - Changed the ASCII restart message to something more friendly.

* Version 0.96
 - More 'ls' fixes against denial of service.
 - Better support for broken NAT gateways.

* Version 0.96pre1
 - Added '-P' flag (explicitely set an IP address in reply to a PASV
command), '-A' flag (to chroot() everyone) and  '-H' flag (to avoid DNS
resolution), '-U' flag (to limit the maximum depth of a recursive 'ls' and
the maximum number of displayed files) and '-M' flag (allow anonymous users
to create directories).
 - Added FEAT command.
 - Allow anonymous users to create directories if they have write access to
the parent directory.
 - Rewritten handling of virtual hosts.
 - Full IPv6 support. 

* Version 0.95.2
 - Changed the build-in 'ls' format to have Internet Explorer properly parse
symbolic links.
 - Implemented STOU, ALLO and APPE commands.
 - Added '-e' flag to only allow anonymous connections.
 - Drop CAP_SYS_CHROOT to enhance security.

* Version 0.95.1
 - Fixed wrong user count for the '-c' option.
 - Fixed chroot() when capabilities drop is enabled.
 - Always force 8 bits transfers if we didn't set the compatibility
 mode (-b) .

* Version 0.95
 - Fixed GUI for old versions of Dialog (Slackware).
 - Handle SPSV, XCWD and XCUP commands.
 - Improved documentation.
 - Better PAM sample.
 - Minor bug fixes and more security paranoia.
 - Included a patch to improve Netfilter's FTP connection tracking.
 - Upload/download quotas for w4r3z d00d2.
 - Native support for LDAP directories.

* Version 0.95-pre{1,2,3,4}

 - Raised the upload buffer size: uploads should be a bit faster now.
 - Bandwidth throttling (see flags '-t' and '-T') to avoid anonymous users
fill up the whole bandwidth.
 - Incremental delay after authentication failures to limit brute-force
password scanning.
 - Removed a DNS double-check that caused connection problems with hosts
that had broken DNS entries.
 - Installation GUI (dialog).
 - Implemented SITE HELP.
 - Version number is now displayed in the first banner.
 - Insecure users (non-chrooted, non-root and anonymous) can't upload dot
files any more.
 - Added paranoid timeouts.

* Version 0.94

 - Linux capabilities fixes.
 - SITE CHMOD support.

* Version 0.93

 - Support for the FXP protocol.

* Version 0.92

 - Added a workaround for broken clients like LeechFTP.
 - Syslog identity changed to "pure-ftpd".
 - Idle clients sending nothing but NOOP are now disconnected.

* Version 0.91

 - Possible better network throughput (TCP_CORK usage).
 - The number of active sessions wasn't properly computed if the server port
wasn't the default FTP port - fixed. We can now have several Pure-FTPd
instances on different ports of the same computer.
 - Deprecated '-x' flag in favor of '-a'.
 - Updated man pages, documented http-style handling.
 - Moved to Sourceforge.

* Version 0.90: initial release.

 - IPv6 support.
 - PAM authentication.
 - ASCII transfers.
 - Preliminary large files support (needs a sendfile() wrapper).
 - Capabilities drop.
 - Switchable user names.
 - Switchable humor.
 - Cookies.
 - Chroot()ed home directories.
 - Various security enhancements.
 - Fixed HTTP-style handling.
 - Rewritten documentation.
 - Autoconf.
 - Code clean up and compilation fixes.
 - No more need for mkusers - symbolic names are now dynamically cached.
 
